Void ships both GnuPG legacy (as gnupg1) and GnuPG stable (as gnupg).


For using smartcards such as Yubikeys with GnuPG, there are two backends for communicating with them through GnuPG: The internal CCID driver of GnuPG's scdaemon, or the PC/SC driver.

scdaemon with internal CCID driver

By default, scdaemon, which is required for using smartcards with GnuPG, uses its internal CCID driver. For this to work, your smartcard needs to be one of the smartcards in the udev rules here and you need to either be using elogind or be a member of the plugdev group. If these two condition are fulfilled and you don't have pcscd running, gpg --card-status should successfully print your current card status.

scdaemon with pcscd backend

If you need to use pcscd for other reasons, run echo disable-ccid >> ~/.gnupg/scdaemon.conf. Now, assuming your pcscd setup works correctly, gpg --card-status should print your card status.